EC7AW-24S05
Cincon EC7AW-24S05 isolated DC-DC converter, 10 W, 4:1 9-36 V input and a regulated 5 V output with 1500 VDC isolation in a DIP-24 package.
The EC7AW-24S05 is a Cincon EC7AW series isolated DC-DC converter rated at 10 W with a 4:1 input range of about 9 V to 36 V DC and a single regulated 5 V output at up to about 2 A, in a DIP-24 package of about 31.8 by 20.3 by 10.2 mm. The 4:1 input range lets the module accept a varying 24 V bus or a battery and hold the output, and the isolation of about 1500 VDC separates the input and the output for safety and noise immunity. The module provides a regulated output with a continuous short-circuit protection, a dual-output option in the same family and an efficiency of about 86 percent, and it operates over an industrial temperature range. The industry-standard DIP-24 footprint drops into a common board layout, and the 10 W 5 V output is a very common logic rail, which makes the part a frequent choice for an industrial control board or a telecom card. Typical applications include industrial control, telecom and datacom, instrumentation and a distributed power architecture. Every module BeiLuo ships is factory-traceable and includes an import declaration, a certificate of origin and a RoHS compliance file. Our FAE team helps you choose the module and plan the layout and the filtering.
FAE Professional Review
The EC7AW-24S05 gives a clean isolated 5 V rail at 10 W from a 24 V bus or a battery, with a 4:1 input range and the standard DIP-24 footprint, so it suits a logic rail on an industrial or a telecom card. It is a well-balanced part between a small auxiliary module and a larger one. Keep the input capacitor close and follow the filter guidance.
| Parameter | Value |
|---|---|
| Power | 10 W |
| Input | 9-36 V DC |
| Output | 5 V |
| Isolation | 1500 VDC |
| Package | DIP-24 |
Application Circuits
Industrial control boards
Reference circuits and application schematics for Industrial control boards are available from our FAE team.
Telecom and datacom
Reference circuits and application schematics for Telecom and datacom are available from our FAE team.
Instrumentation
Reference circuits and application schematics for Instrumentation are available from our FAE team.
Need a reference schematic or design review? Our FAE engineers can share verified circuits and layout guidance for this part.
Related Documents
Alternative Part Numbers
Complementary Part Numbers
| Model | Package | Note | Action |
|---|---|---|---|
| CFM40S120 | Open frame 2x4 | AC-DC supply that provides the DC bus | View |
| EC3SCW-48S12 | 2x1 inch | Higher-power module for a larger rail | View |
Recommended Complementary Products
Frequently Asked Questions
What projects suit the EC7AW-24S05?
It suits a logic rail on an industrial or a telecom card that must derive an isolated 5 V rail at about 10 W from a 9-36 V bus, with a 4:1 input range and a standard DIP-24 footprint.
Confirm the power and the isolation.
Do I need a minimum load?
Check the datasheet for the minimum load and the no-load behavior of the EC7AW series, and confirm the output stays in regulation at your lightest load. Add a small pre-load only where the datasheet requires it.
Our FAE team can confirm the load condition.
Is the module genuine and documented?
BeiLuo supplies factory-traceable EC7AW-24S05 modules with an import declaration, certificate of origin and RoHS file on every order. Stock is normally available and the datasheet downloads from this page.
Order a sample to validate the module before volume production.